Maxiheat Flue Kit Installation Instructions

Maxiheat Flue Kit Installation Instructions. Maxiheat standard metallic black flue kit with double shield 350 700 475 385 830 1220 151 maxiheat decromesh metallic black flue kit with inner shield freestanding With maxiheat standard default flue kit (mxfkt3ss) 250 425 275 280 210 900 800 installation 4.

6" WOOD HEATER FLUE INBUILT S/S 3inch OFFSET diameter B/New eBay from www.ebay.com.au

This appliance must be installed using raypak approved flue kit and installed as per the australian standard as/anz 2918 codes this appliance must be flued directly off the appliance and discharged to atmosphere. 1 frederick st 02 9901 3643 more information. To ensure safe and efficient installation, these flue systems must be installed by either an nzhha registered installer, or someone competent in installing solid fuel appliances.

Source: www.ebay.com.au

Heater and flue pipe clearances from combustible waifs must be in accordance with heater manufacturer’s specifications and as/nzs 2918:2001. Cut a 250mm square hole in ceiling.

Fireplace Insert Models May Be Installed In A Timber Framed Structure Instead Of A Masonry Fireplace By Using A ‘Zero Clearance’ Installation Kit.

This maxiheat 4m mesh flue kit charcoal is suitable for most wood fire heaters that need a 150mm or 6 inch inner flue. Heater and flue pipe clearances from combustible waifs must be in accordance with heater manufacturer’s specifications and as/nzs 2918:2001. This manual contains detailed information for the correct installation of the metro eco flue kits.

Feed Stainless Steel Flue Through Decorative Flue And Drop Box Through To The Required Height.

All wood heater installations should. I am sure we will be able to help you find and order the product you need. Check that the wood fire’s location allows the outer casing to clear all structural roof timbers.

1X Maxiheat 4M Chimney Flue Kit.

The instructions say trim the two layers of gal to allow the cowl to sit neatly onto the active flue lenght. 1) locate heater in its proposed position and mark a point. 1 x full s/s cowl rain excluder (mxcress) 1 x maxiheat flue fitting screws & spacers.

While All Models Have Been Tested To Show Compliance With The Emission Limits Of As/Nzs.4013:1999, Only Some Models May Be Installed In

1x maxiheat 4m mesh flue kit charcoal. Mixing flue system components from different sources or modifying the dimensional. Ensure safety this flue kit must be installed as outlined in these instructions.

This Maxiheat 4M Chimney Flue Kit Is Suitable For Inbuilt Wood Fire Heaters That Need A 150Mm Or 6 Inch Inner Flue.

Available in metallic black or charcoal. Please note an additional flue shield is The standard also states that there must be a three meter clearance all the way around the cowl.